Equipment Information
The device is bi-directional and is suitable for PV systems with battery storage. The energy produced by the PV system is prioritised for load consumption (including EV charging), with excess energy used to charge the batteries, and any excess fed directly into the public grid. When the PV output is not sufficient to support the connected loads, the system automatically obtains energy from the batteries if they are sufficient. If the battery energy is not sufficient to meet its own consumption needs, energy is obtained from the public grid.
Technische Parameter
| Inverter Information | |
| Max. Input Power | 7000W |
| PV Input Voltage Range | 150~ 500VDC |
| MPPT Operating Voltage Range | 120~430VDC |
| Number of MPP Trackers | 2(1 MPPT per string) |
| Input Current per MPPT | 15A/15A(Max) |
| Nominal Utility Grid Voltage | 220/230/240VAC |
| Nominal Utility Grid Frequency | 50/60Hz |
| Rated Power Output to Utility Grid | 5000W |
| Apparent Power Output to Utility Grid | 5500VA |
| Back-up Rated Power Output | 4500W |
| Switch Time: <10ms | <10ms |
| EV Charger Information | |
| Rated Power | 7000W |
| Nominal Voltage | 220/230/240VAC |
| Nominal Frequency | 50/60Hz |
| Operation Mode | Swipe card/APP control/Insert charger plug to start automatically/Schedule appointment for charging |
| Output cable | 5m AC charging cable |
| Battery | |
| Battery Type | LiFePO4 |
| Single Battery Energy | 5.12KWH |
| Expandable Batteries | 8 PCS(Max) |
| Usable Energy Range | 5.12-40.96KWH |
| Battery Voltage Range | 41.6-58.5VDC |
| Convetion Efficiency | |
| Max. Efficiency | 98% |
| EU Efficiency | 97% |
| Max. Battery to AC Efficiency | 95% |
| MPPT Efficiency | 99.90% |
| Others | |
| Operating Temperature Range | - 25°C~55°C |
| Relative Humidity | ≤95％（25℃） |
| Installation Altitude above Sea Level (m) | ＜2000 |
| Cooling Mode | Natural Cooling |
| Communication | RS485/CAN/WiFi |
| Size | Inverter: 645*557*370mm |
| EV Charger:650*270*370mm | |
| Battery: 585*270*370mm(5.12KWH/ PCS) | |
| Base:680*110*378mm | |
Configuration Instructions
The system is centred on a highly integrated charging control board. The charging control board integrates power supply, metering, control and communication, which effectively reduces the size of the AC charging pile, has a simple and reliable layout, and the wiring is simple and easy to operate, which provides a good user experience.
This system can use non-contact card swiping device (physical IC/ID card, support mobile phone NFC function). The mobile phone with NFC function can swipe the card through (simulate/copy) the function of physical card, and achieve hardware encryption and authentication processing of the card to ensure the security of card account data.
This system adopts mobile phone APP to start remotely and supports both online and offline modes, users can bind the equipment through APP to achieve equipment control as well as data observation.
Certifications
